Instruction manual

Programming NetMaster
F232151
88
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
65. Delicates Rinse Final
Fill/Tumble Time “+065”
This option allows the owner to set the amount of final
rinse fill/tumble time for the Delicates cycle.
How to Program Delicates Rinse Final
Fill/Tumble Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 162
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+065” appears in the VFD. Refer
to Figure 163.
Figure 163
4. When “+065” appears in the VFD, press the
START (enter) keypad. The current number
of minutes set for the Delicates Rinse Final
Fill/Tumble Time will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 164.
NOTE: The Delicates Rinse Final Fill/Tumble Time
can be set from zero (0) to 15 minutes.
Figure 164
6. Press the START (enter) keypad when the correct
number of minutes appears in the VFD. The next
option, “+066”, will appear in the VFD.
NOTE: To program “+066” (Delicate Spin Extract
Time), refer to option 66. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C865I
C865I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32