Instruction manual

Programming NetMaster
F232151
70
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
36. Set Real-Time Clock Hours
“+036”
This option allows the owner to set NetMaster’s
internal clock to the correct time in hours.
How to Program the Clock Hours
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 108
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+036” appears in the VFD. Refer
to Figure 109.
Figure 109
4. When “+036” appears in the VFD, press the
START (enter) keypad. The current time in hours
will appear in the VFD.
NOTE: The hours will be displayed in military time.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the hours to the
correct time. Refer to Figure 110.
Figure 110
6. Press the START (enter) keypad when the correct
time in hours appears in the VFD. The next
option, “+037”, will appear in the VFD.
NOTE: To program “+037” (Set Real-Time Clock
Day), refer to option 37. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C797I
C797I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32