Instruction manual

Programming NetMaster
69
F232151
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
35. Set Real-Time Clock Minutes
“+035”
This option allows the owner to set NetMaster’s
internal clock to the correct time in minutes.
How to Program the Clock Minutes
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 105
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+035” appears in the VFD. Refer
to Figure 106.
Figure 106
4. When “+035” appears in the VFD, press the
START (enter) keypad. The current time in
minutes will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the minutes to the
correct time. Refer to Figure 107.
Figure 107
6. Press the START (enter) keypad when the correct
time in minutes appears in the VFD. The next
option, “+036”, will appear in the VFD.
NOTE: To program “+036” (Set Real-Time Clock
Hours), refer to option 36. To program other
options, refer to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C796I
C796I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32