Instruction manual

Programming NetMaster

F232151

30. Coin #1 Value “+030”

This option allows the owner to set a specific

numerical value for a coin entered. For example, in the

United States, the coin value for one quarter would be

measured in cents (25). Therefore, the coin value

entered for one quarter would be 00025.

If the Regular Hot Wash Vend Price (option 2) is set

for “.75”, and the Coin Value is set for “00025”, the

vend price displayed will decrease by .25 for each coin

entered.

How to Program Coin #1 Value

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the DELICATES (+) or the COLD (-)

keypad until “PrOg” appears in the VFD. Press

the START (enter) keypad and “+001” will

appear in the VFD.

Figure 92

3. Press the DELICATES (+) or the COLD (-)

keypad to scroll through the programmable

options until “+030” appears in the VFD. Refer

to Figure 93.

Figure 93

4. When “+030” appears in the VFD, press the

START (enter) keypad.There are five digits in the

Coin #1 Value. The fifth digit will appear in the

VFD and will flash one second on and one

second off. Refer to Figure 94.

Figure 94

5. Press the DELICATES (+) or the COLD (-)

keypad to increase or decrease the value of the

fifth digit. Refer to Figure 95.

NOTE: The coin value can be set from 1 to 65,535.

Figure 95

C762I

C782I

C826I

B029R

1 Press this pad (+) to scroll forward or increase a value

2 Press this pad (enter) to choose a selected value or

option

3 Press this pad (-) to scroll back or decrease a value

C826I

neednew#2