Instruction manual

Programming NetMaster

F232151

27. Special Vend A Special Wash

Warm Wash Vend Price “+027”

This option allows the owner to set the vend price

for a Warm Wash in the Special Wash cycle in Special

Vend A.

How to Program Special Vend A Special

Wash Warm Wash Vend Price

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the DELICATES (+) or the COLD (-)

keypad until “PrOg” appears in the VFD. Press

the START (enter) keypad and “+001” will

appear in the VFD.

Figure 79

3. Press the DELICATES (+) or the COLD (-)

keypad to scroll through the programmable

options until “+027” appears in the VFD. Refer

to Figure 80.

Figure 80

4. When “+027” appears in the VFD, press the

START (enter) keypad. There are five digits in

the Special Vend A Special Wash Warm Wash

Vend Price. The fifth digit will appear in the VFD

and will flash one second on and one second off.

Refer to Figure 81.

Figure 81

5. Press the DELICATES (+) or the COLD (-)

keypad to increase or decrease the value of the

fifth digit. Refer to Figure 82.

NOTE: The vend price can be set from 0 to 65,535.

Figure 82

C762I

C785I

C826I

B029R

1 Press this pad (+) to scroll forward or increase a value

2 Press this pad (enter) to choose a selected value or

option

3 Press this pad (-) to scroll back or decrease a value

C826I

neednew#2