Instruction manual

Programming NetMaster

F232151

6. Special Wash Warm Wash Vend

Price “+006”

This option allows the owner to set the vend price for a

warm wash for the special wash cycle. This vend price

will be displayed in the VFD when WARM is selected.

How to Program the Special Wash Warm

Wash Vend Price

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the DELICATES (+) or the COLD (-)

keypad until “PrOg” appears in the VFD. Press

the START (enter) keypad and “+001” will

appear in the VFD.

Figure 28

3. Press the DELICATES (+) or the COLD (-)

keypad to scroll through the programmable

options until “+006” appears in the VFD. Refer

to Figure 29.

Figure 29

4. When “+006” appears in the VFD, press the

START (enter) keypad. There are five digits in

the Special Wash Warm Wash Vend Price. The

fifth digit will appear in the VFD and will flash

one second on, one second off. Refer to

Figure 30.

Figure 30

5. Press the DELICATES (+) or the COLD (-)

keypad to increase or decrease the value of the

fifth digit. Refer to Figure 31.

NOTE: The vend price can be set from 1 to 65,535.

Figure 31

C762I

C836I

C826I

B029R

1 Press this pad (+) to scroll forward or increase a value

2 Press this pad (enter) to choose a selected value or

option

3 Press this pad (-) to scroll back or decrease a value

C826I

neednew#2