Instruction manual

F232151

Programming NetMaster

What Can Be Programmed?

This feature allows the owner to program cycle

information, standard vend pricing, special vends and

other features by using the keypads. The control must

have the Manual Programming Mode enabled, which

is the factory default. This mode can only be turned

OFF and ON by using the Micro-Wand IIIE, the Smart

Card Reader or the Network. Refer to this section when

programming NetMaster.

This section offers a detailed description of basic options

available to program. Additional options can be found

in the Enhanced Programming Guide, available at

extra cost.

Each description includes instructions on when and

why the option might be used and, more importantly,

how to program the option.

For more advanced users, refer to Table 1 for a quick

reference list of the options available through the

programming mode.

NOTE: The three numbers in the Option column of

Table 1 are what will be shown in the VFD display

when that option is selected.