Instruction manual

133

F232151

Communications Mode

Infra-red Communications

The Infra-red Communications feature allows the

washer-extractor control to communicate with the

Micro-Wand IIIE. The washer-extractor control can be

programmed and have its data read without using the

keypad. It may also be used to start and stop various

diagnostic tests.

How to Begin Communications with Micro-Wand

IIIE

The control will go blank and the VFD will display

“-C-” until the communication is complete. The

display will return to the previous mode. If an error

occurs that terminates communication, the VFD will

display “EC:XX” (“XX” represents the error code).

NOTE: The Infra-red Communications option

must be turned on. Refer to option 81 in

Programming NetMaster.

Card Reader Communications

The Card Reader Communications feature allows the

washer-extractor control to communicate with the

Card Reader. The washer-extractor control can be

programmed and have its data read without using the

keypad.

Network Communications

The Network Communications feature allows the

washer-extractor control to communicate with the

Network. The washer-extractor control can be

programmed and have its data read without using the

keypad.