Instruction manual

Programming NetMaster
F232151
108
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
7. Press DELICATES (+) or the COLD (-) keypad
to increase or decrease the value of the active
digit and the START (enter) keypad to enter the
value of the digit and advance to the next digit.
8. Press the START (enter) keypad with the last
active digit. The next option, “+122”, will appear
in the VFD.
NOTE: To program “+122” (Site Code #1), refer to
option 122 in Programming NetMaster in the
Enhanced Programming Guide, available at extra
cost. To program other options, refer to the
appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable
option, not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.