Instruction manual

Programming NetMaster
F232151
94
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Configuration #1 Programming
Refer to Table 5 to turn on or turn off the
preprogrammed daylight savings option, wash
temperature display option, infra-red access option,
decimal point option, manual programming and the
automatic collect option in NetMaster.
To change any or all of these configuration options,
review the following descriptions carefully and choose
the appropriate configuration value from Table 5.
Enter the appropriate value in step 5 on the previous
page.
Daylight Savings This option automatically sets the clock in NetMaster to account for the time change during
Daylight Savings.
OFF = Turns off the automatic daylight savings option programmed in NetMaster.
ON = Turns on the automatic daylight savings option programmed in NetMaster.
Wash Temperature This option determines if the temperature LEDs indicate the selected wash temperature during the
entire cycle or indicates fill temperature during each rinse.
SELECT (OFF)= Selected wash temperature remains on for entire cycle.
ACTUAL (ON)= LEDs indicate actual water temperature during every fill step. LEDs will be off
during distribute and spin steps.
Infra-red Access This option determines if a Micro-Wand can access or program NetMaster.
OFF = Turns off the infra-red access by the Micro-Wand.
ON = Turns on the infra-red access by the Micro-Wand.
Decimal Point This option determines if a decimal point is used when displaying the vend price (i.e., machines
using token currency may choose to remove the decimal point).
OFF = Turns off the decimal point from appearing in the VFD.
ON = Turns on the decimal point to appear in the VFD.
Automatic Collect This option automatically collects all audit data information whenever the Micro-Wand
communicates with the control. Turn off Automatic Collect to prevent access to collection
information when using an outside source to program NetMaster.
OFF = Turns off the automatic collect with the Micro-Wand.
ON = Turns on the automatic collect with the Micro-Wand.
Manual Programming This option allows special programming functions to be accessed manually rather than requiring the
use of a Micro-Wand or other communication source.
OFF = Turns off Manual Programming.
ON = Turns on Manual Programming.