Instruction manual

Programming NetMaster
85
F232151
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
63. Delicates Rinse #1 Fill/Tumble
Time “+063”
This option allows the owner to set the amount of rinse
#1 fill/tumble time for the Delicates cycle.
How to Program Delicates Rinse #1 Fill/
Tumble Time
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until “PrOg” appears in the VFD. Press
the START (enter) keypad and “+001” will
appear in the VFD.
Figure 159
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until “+063” appears in the VFD. Refer
to Figure 160.
Figure 160
4. When “+063” appears in the VFD, press the
START (enter) keypad. The current number of
minutes set for the Delicates Rinse #1 Fill/
Tumble Time will appear in the VFD.
5. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number of minutes displayed in the VFD to the
desired number of minutes. Refer to Figure 161.
NOTE: The Delicates Rinse #1 Fill/Tumble Time
can be set from zero (0) to 15 minutes.
Figure 161
6. Press the START (enter) keypad when the correct
number of minutes appears in the VFD. The next
option, “+064”, will appear in the VFD.
NOTE: To program “+064” (Delicates Rinse Extra
Fill/Tumble Time), refer to option 64 in
Programming NetMaster in the Enhanced
Programming Guide, available at extra cost. To
program other options, refer to the appropriate
section.
How to Exit Programming Feature
1. Be sure the control shows a programmable option,
not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
C863I
C863I
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
neednew#2
1
32