Instruction manual

Programming NetMaster

F232151

31. Coin #2 Value “+031”

This option allows the owner to set a specific

numerical value for a coin entered when using the dual

coin drop. For example, the coin value for a dollar coin

would be measured in cents (1.00). Therefore, the coin

value entered for one dollar coin would be 00100.

If the Regular Hot Wash Vend Price (option 2) is set

for “2.00”, and the Coin Value is set for “00100”, the

vend price displayed will decrease by 1.00 for each

dollar coin entered.

How to Program Coin #2 Value

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the DELICATES (+) or the COLD (-)

keypad until “PrOg” appears in the VFD. Press

the START (enter) keypad and “+001” will

appear in the VFD.

Figure 97

3. Press the DELICATES (+) or the COLD (-)

keypad to scroll through the programmable

options until “+031” appears in the VFD. Refer

to Figure 98.

Figure 98

4. When “+031” appears in the VFD, press the

START (enter) keypad. There are five digits in

the Coin #2 Value. The fifth digit will appear in

the VFD and will flash one second on and one

second off. Refer to Figure 99.

Figure 99

5. Press the DELICATES (+) or the COLD (-)

keypad to increase or decrease the value of the

fifth digit. Refer to Figure 100.

NOTE: The coin value can be set from 1 to 65,535.

Figure 100

C762I

C781I

C826I

B029R

1 Press this pad (+) to scroll forward or increase a value

2 Press this pad (enter) to choose a selected value or

option

3 Press this pad (-) to scroll back or decrease a value

C826I

neednew#2