Instruction manual

NetMaster Special Features
F232151
16
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Start Pulse Operation
The control will accept pulses from a central card
reader system. The machine can be programmed to
receive a single start pulse or multiple start pulses, or
the Start Pulse Option can be turned off. The Start
Pulse Mode allows the machine to go from the Ready
Mode to the Start mode after a single pulse or multiple
pulses are received. For details on programming Start
Pulse Operation, refer to Programming NetMaster in
the Enhanced Programming Guide, available at extra
cost.
Access Panel and Coin Vault
Openings
The control will capture the times and dates of the
openings of the Coin Vault and the Access Panel. The
information is saved in memory. An open access panel
combined with various keypad presses allows the
control to enter manual modes of operation if the
Break-In Alarm is not on. These modes include Manual
Programming, Audit Collection and Diagnostics.
Break-In Alarm
This feature allows the owner to program the machine
to signal an alarm if the access panel or coin vault is
opened without disabling the alarm first. The date and
time of the break-in is recorded.
Special Vend
This feature allows the owner to program the control
to allow programmable vend prices for specific hours
and dates.
For details on programming Special Vend, refer to
Programming NetMaster.
Lucky Cycle
This feature allows the owner to program the machine
to provide a free vend cycle to customers after a
certain number of cycles have occurred.
For details on programming the Lucky Cycle Option,
refer to Programming NetMaster.
Site Code Pricing
This feature allows owners to program the control to
accept site codes for special vending that are specific
to select groups or individuals when using cards.
For details on programming the site code options, refer
to Programming NetMaster in the Enhanced
Programming Guide, available at extra cost.
Special Cycle
This feature allows the owner to offer extra features to
customers for an added vend price. Features available
include extra wash time, extra Rinse Extra time, warm
water (used in the rinse final fill step) and Very High
Speed Final Extract (on VFD models).
For details on programming the Special Cycle option,
refer to Programming NetMaster in the Enhanced
Programming Guide, available at extra cost.
Auto-Flush Feature
This feature, if enabled, allows the control to be set to
automatically flush the dispenser compartments at
predetermined intervals and times. The control will
flush the dispenser compartments with hot water for a
pre-programmed number of seconds or until a low
water level is reached.