Instruction manual

Programming NetMaster
F232151
98
© Copyright, Alliance Laundry Systems LLC DO NOT COPY or TRANSMIT
118. Auto-Flush Option +118
This option programs the control to automatically
flush the dispenser compartments at set times and
intervals to keep the compartments clean.
The owner can select Auto-Flush to occur after one (1)
to 127 cycles and can determine the time and days of
week Auto-Flush will occur. If zero (0) is selected for
cycles, the Auto-Flush will always occur on the
selected time and day.
How to Program Auto-Flush Cycle Option
1. Control must be in Manual Mode. Refer to
Entering the Manual Mode.
2. Press the DELICATES (+) or the COLD (-)
keypad until PrOg appears in the VFD. Press
the START (enter) keypad and +001 will
appear in the VFD.
Figure 189
3. Press the DELICATES (+) or the COLD (-)
keypad to scroll through the programmable
options until +118 appears in the VFD. Refer
to Figure 190.
Figure 190
4. When +118 appears in the VFD, press the
START (enter) keypad. A number will appear in
the VFD. This number corresponds to the current
Auto-Flush Option Programming Value.
5. Locate the desired number in Table 7.
6. Press the DELICATES (+) or the COLD (-)
keypad to increase or decrease the current
number until correct. Refer to Figure 191.
Figure 191
7. Press the START (enter) keypad when the correct
number appears in the VFD. The next option,
+119, will appear in the VFD.
NOTE: To program +119 (Auto-Flush Hour),
refer to option 119. To program other options, refer
to the appropriate section.
How to Exit Programming Feature
1. Be sure the control shows a programmable
option, not a value.
2. While pressing and holding the NORMAL
keypad with one hand, press the PERM PRESS
keypad with the other hand. The control will
revert back to the Ready Mode. Refer to
Figure 2.
C762I
CHM13R
B029R
1 Press this pad (+) to scroll forward or increase a value
2 Press this pad (enter) to choose a selected value or
option
3 Press this pad (-) to scroll back or decrease a value
+118
Auto-Flush
Option Value
Auto-Flush
ON/OFF
Number of
Cycles
0 127 OFF 0 127
128 ON 0
129 ON 1
130 ON 2
131 255 ON 3 127
Table 7
neednew#2
1
32