Service manual

32 39201

Section 5 Service Procedures

To reduce the risk of electric shock, fire, explosion, serious injury or death:

• Disconnect electric power to the washer before servicing.

• Never start the washer with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer is properly grounded.

W003

WARNING

g. DUAL COIN DROP INSTALLATION

(1) Gently work new coin drop into meter case

with the drop’s front face plate down. Refer

to Figure 20.

(2) Carefully pull front of coin drop up and

forward, so the drop’s front face plate

clears the meter case’s door switch bracket.

Refer to Figure 21.

(3) Rest the two coin-return stops on top of the

coin drawer housing, as shown in

Figure 22.

(4) Grasp top of coin drop front face plate

between the two drops, as shown in

Figure 21.

Figure 20

W413SE3A

COIN DROP

FRONT

FACE PLATE

METER

CASE

COIN

DROP

Figure 21

Figure 22

W414SE3A

COIN DROP

FRONT

FACE PLATE

METER CASE

DOOR SWITCH

BRACKET

W415SE1A

COIN

DRAWER

HOUSING

COIN-RETURN

STOPS