Service manual

20 39201
Section 4 Grounding
To reduce the risk of electric shock, fire, explosion, serious injury or death:
• Disconnect electric power to the washer before servicing.
• Never start the washer with any guards/panels removed.
• Whenever ground wires are removed during servicing, these ground wires must be
reconnected to ensure that the washer is properly grounded.
W003
WARNING
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
19. CONTROL HOOD WIRE HARNESS TO TOP LEFT REAR CORNER GUSSET OF CABINET
Refer to Figure 3
20. WIRE HARNESS TO MOTOR
Refer to Figure 4
Figure 3
W490SE3A
GROUND
WIRE
GROUND
SCREW
CORNER
GUSSET
GROUND
WIRES
Figure 4
WIRE
HARNESS
CONNECTION
BLOCK
W329SE3C
GROUND