Specifications

Shakeout Routine

WARNING

NEVER insert hands or objects into basket until it

has completely stopped. Doing so could result in se-

rious injury.

SW012

A shakeout agitation step is programmed at the end of every cy-

cle and will help prevent tangling of the load.

The shakeout time is set at the factory to agitate for 20 seconds.

Models Equipped with Both Steam and

Electric Heating

1. To switch between the heating type, locate the switch on the

left side of control module. Refer to Figure 41 .

2. To select steam heat, make sure the switch is in the down po-

sition.

3. To select electric heat, make sure the switch is in the up po-

sition.

PHM784N_SVG

Figure 41

Operation

F8423301ENR3