Specifications

7. Press the numeric keypads to select the desired wash cycle.
Refer to Cycle Number .
Cycle
Number Cycle Name
1 Permanent Press Light Soil
2 Light Soil
3 Permanent Press Medium Soil
4 Medium Soil
5 Permanent Press Heavy Soil
6 Heavy Soil
7 Rags
8 Reclaim
9 Delicates
10 95°C
11 60°C
12 40°C
13 95°C Permanent Press
14 60°C Permanent Press
15 40°C Permanent Press
16 70°C Permanent Press
17 50°C Gentle
18 30°C Gentle
19 Custom #1
20 Custom #2
21 Custom #3
Cycle
Number Cycle Name
22 Custom #4
23 Custom #5
24 Custom #6
25 Custom #7
26 Custom #8
27 Custom #9
28 Custom #10
29 Custom #11
30 Custom #12
Table 31
CAUTION
Water cannot be extracted from rubber backed
items. To avoid damage to machine from out of bal-
ance conditions, do not use a spin (extract) step
when washing rubber backed items. Warranty will be
voided.
W880
8. Press the START keypad to start the selected cycle.
As the cycle proceeds, the display will show and count down the
remaining cycle time.
To begin the cycle at any step other than the first step, press the
START keypad to advance through the cycle to the desired start-
ing point. Refer to the Programming Manual for information to
disable Rapid Advance.
If the door is open, the display will indicate that the door needs to
be closed and locked.
9. Close the door to start a cycle.
The cycle will continue until its completion. Then the display
will show the door is ready to be unlocked and opened.
NOTE: The drain step that occurs before an extract
step or a spray rinse extract step cannot be skipped
using Rapid Advance. The machine MUST drain and
balance during the drain step before it can extract.
Operation
66
©
Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT F8423301ENR3