Specifications

Operation

Operating Instructions for UniLinc Con-

trol

1. Verify display shows the Cycle Menu Screen.

2. Press the door unlock button located on the lower left front on

the control. Refer to Figure 31 .

PHM705N_SVG

UW35–UW150 Models

1. Emergency Stop Button

Figure 31

NOTE: Door must be opened within 5 seconds of

pressing the door unlock button.

3. 35 – 125 models: Turn door handle clockwise and swing the

door left to open. Refer to Figure 32 .

PHM791N_SVG

UW35–UW125 Models

Figure 32

150 models: Turn handle counterclockwise and swing the door

right to open. Refer to Figure 33 .

PHM717N_SVG

UW150 Models

Figure 33

4. Load to capacity whenever possible. DO NOT OVERLOAD.

Underloading can cause out-of-balance conditions that can

shorten machine life.

PHM835N_SVG

Figure 34

CAUTION

Be careful around the open door, particularly

when loading from a level below the door. Impact

with door edges can cause personal injury.

SW025

NOTE: When washing items which may disintegrate or

fragment, such as mop heads or sponges, use laundry

nets to prevent drain blockage.

IMPORTANT: To prevent out-of-balance conditions,

premature wear or damage to machine when using

laundry nets, use several small nets in a load.

5. Close and lock the door.

Operation

F8423301ENR3