Specifications

Steam Supply Information

Capacities 35 60 80 100 125/150

Maximum pres-

sure, psi [bar]

80 [5.5] 80 [5.5] 80 [5.5] 80 [5.5] 80 [5.5]

Table 29

IMPORTANT: Failure to install the customer supplied

steam filter may void the warranty.

Chemical Injection Supply System

WARNING

Dangerous Chemicals. May damage eyes and skin.

Wear eye and hand protection when handling chemi-

cals; always avoid direct contact with raw chemi-

cals. Read the manufacturer’s directions for acci-

dental contact before handling chemicals. Ensure an

eye-rinse facility and an emergency shower are with-

in easy reach. Check at regular intervals for chemi-

cal leaks.

W363

IMPORTANT: Undiluted chemical dripping can damage

the machine. All chemical injection supply dispenser

pumps and dispenser tubing should be mounted below

the machine’s injection point. Loops do not prevent

drips if these instructions are not followed. Figure 22

shows a typical Chemical Injection Supply System.

IMPORTANT: Failure to follow these instructions could

damage the machine and void the warranty.

PHM825N_SVG

1. Injection Point

2. Loops

3. Chemical Dispenser Pump Outlet

4. PVC Pipe

Figure 22

Specifications and Dimensions