Specifications

IMPORTANT: UW150 Design 2 machines are manu-

factured with a normally-closed ball switch and

should not require any adjustment. To avoid nui-

sance tripping, machine must be level with a sum-

med value of 3/8 inch [ 9.5 mm] front to back and

right to left to the earth. If switch is tripped, check if

machine is level and then for poor grouting and bro-

ken anchor bolts. DO NOT BYPASS SAFETY

SWITCH. Contact a qualified service technician for

further assistance.

PHM716N_SVG

150 Pound Models

1. Vibration Switch

Figure 14

Drain Connection Requirements

Figure 15 and Figure 16 show typical direct drain and drain

trough installations.

Specifications and Dimensions

F8423301ENR3