Troubleshooting guide

10
36528
Section 2
TROUBLESHOOTING
DRYER
ELECTRONIC CONTROL HAS NO VISIBLE DISPLAY
THE ELECTRONIC CONTROL
HAS NO LED OR VFD
FUNCTIONING ON THE
CONTROL BOARD.
REPLACE ELECTRONIC
CONTROL.
OPEN
CONTROL
PANEL
PLUG ELECTRONIC
UNIT INTO ELECTRICAL
OUTLET.
ELECTRONIC CONTROL HAS NO VISIBLE DISPLAY – – DRYER
YES
YES
DISCONNECT POWER AND CHECK
FOR BROKEN, LOOSE, OR INCORRECT
WIRING FROM THE ELECTRICAL
OUTLET TO THE ELECTRONIC CONTROL.
NOTE:
THIS VOLTAGE CHECK CONFIRMS THAT
MAIN POWER IS PRESENT TO THE CONTROL.
NO
NO
IS THE
POWER CORD
PLUGGED IN?
IS
THERE VOLTAGE
AT "H4-2" BLACK TO
"H4-3" WHITE?
D203S