Specifications

Installation

Step 4: Wipe Out Inside of Dryer

Before using dryer for the first time, use an all-purpose

cleaner, or a detergent and water solution, and a damp

cloth to remove shipping dust from inside dryer drum.

Step 5: Plug In the Dryer

Refer to section on Electrical Requirements, and

connect the dryer to an electrical power source.

Figure 6

DRY689N

ELECTRIC

Connect to 30 Amp circuit.

D0061

Figure 7

GAS

Plug cord into separately fused 15 Amp circuit.

D2541

Figure 8

Step 6: Check Installation

Refer to Installer Checkfist on the back cover of this

manual and make sure that dryer is installed correctly.