Operating instructions

Introduction
F232172
6
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Control Output Fuse Board
This portion of the control contains the power supply
for the control unit, and also the switching devices
which power the components in the machine, all of
which are on the output PC board. The switching
devices are controlled by the control unit, and are solid
state.
Harnessing
Wiring harnesses are modular – harnesses common to
various configurations are similar, while those specific
to a certain configuration can be added. There are
harnesses for inputs to the control unit, for outputs
from the control power/output unit to the machine
components, and for the main incoming power to the
control power/output unit.
Communications
Central Pay System
(Central Pay System Models Only)
The models are usually designated by the “Prep for
Central Pay” option. The control will accept
communications with the central pay system in order
to perform vending transactions to pay for cycles.
For detailed information on the Central Pay System
Communications, refer to the manufacturer.
Card Reader
(Card Reader Models Only)
The models are usually designated by the “Prep for
Card Reader” option. The control will accept
communications with a Card Reader in order to
perform vending transactions when a card is inserted
to pay for cycles. The Card Reader can also allow the
owner to program and collect audit information.
For detailed information on the Card Reader
Communications, refer to the manufacturer.