Operating instructions

11
F232172
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
Control Panel
Figure 3
†Set Up (*) keypad is used in cycle programming in program mode. Refer to Programming Manual.
Summary of Major Features
Table 1
CHM482R CHM488R
1 Cycle 1 9 START Keypad
2 Cycle 2 10 “Clean Filter” Indicator LED (Active for all
3 Cycle 3 C80 and C60 X voltage only Models)
4 Cycle 4/Up Edit 11 Door Open LED
5 Cycle 5 12 Spin Cycle LED
6 Cycle 6 13 Rinse Cycle LED
7 Cycle 7/Set Up (*) Keypad † 14 Add Bleach LED
8 Cycle 8/Down Edit
60C 60C
40C 40C
95C 95C
<
<
30C
CHM488R
CHM482R
WASH
ADD
BLEACH
RINSE
SPIN
DOOR
NORMAL
NORMAL
QUICK AS QUICK WASH
HEAVY SOIL
DELICATE
RM RESS
PERM PRESS
HOT
WARM
HOT
HOT
WARM
COLD
WARM
COLD
START
PE P
WH
DOMESTIC MODELS INTERNATIONAL MODELS
1
5
6
7
8
4
10
2
39
11
12
13
14
15
1
5
6
7
8
4
10
2
39
11
12
13
14
15
LED for Machine Functions LED lights inform operator which machine function is active. DOOR LED lights to
inform operator that the door can be opened or should be closed. The circle LED
indicates that the filter needs cleaning.
Main LED display 4 digit LED display counts down vend amount and cycle time. Lights in LED display
indicate out-of-balance conditions and, in test cycle, water level. Display shows “01” as
the final shakeout time.
Cycle selection keypads Eight (8) cycle select keys with LED indicator to show selected cycle.
START keypad Press to start a cycle after payment is made. LED light will flash to prompt user to press key.
Payment Methods Coin – Single or dual denomination coin drop meter, prepped for after market coin drop
Card – “Prepped” for aftermarket card reader (single vend, start pulse/busy signals)
Remote – “Prepped” for aftermarket remote pay system (single vend, start pulse/busy signals)
Test Cycle with “Advance” For troubleshooting. Advance rapidly through test cycle by pressing the UP key. Refer to
Programming Manual.
Fill Temperatures Cold, Hot, Warm
Supplies Three (3) – Supply 1, 2, and 3
Agitation Types Normal or Gentle
Drain Options Normally open gravity drain
Cycle Count 0 to 9999 cannot be reset – Rolls over after 9999
Automatic Unlock after Power
Failure During Cycle
Standard – 2.5 minutes with magnetic latching door lock solenoid