Specifications

5. Clean customer-supplied steam filter, where applicable. Refer

to Figure 43 .

a. Turn off steam supply and allow time for the valve to

cool.

b. Unscrew cap.

c. Remove element and clean.

d. Replace element and cap.

H042I_SVG

1. Cap

2. Steam Filter Element

Figure 43

6. Check the bearing mounting bolts to make sure they are tor-

qued properly. Refer to Torque .

Torque, ft-lbs.

Model Bearing Torque

20 All 41

30-40 All 101

60 All 201

80-100 All 357

Table 43

7. Tighten motor mounting bolt locknuts and bearing bolt lock-

nuts.

8. Vacuum lint from motor vents.

9. Clean all electronic boards of moisture and dust with canned

air.

10. Verify the insulation is intact on all external wires and that all

connections are secure. If bare wire is evident, call a service

technician.

11. Clean inverter drive cooling fan blades (where applicable).

Maintenance

DO NOT COPY or TRANSMIT

74 Part No. F8429301ENR15