Specifications

© Copyright, Alliance Laundry Systems LLC - DO NOT COPY or TRANSMIT
7
C003292ENR1
Introduction
Delivery Inspection
Upon delivery, visually inspect crate, protective cover
and unit for any visible shipping damage. If the crate,
protective cover or unit is damaged or signs of
possible damage are evident, have the carrier note the
condition on the shipping papers before the shipping
receipt is signed or advise the carrier of the condition
as soon as it is discovered.
Nameplate Location
The nameplate is located inside the door and on the
upper rear panel. Always provide the machine’s serial
number and model number when ordering parts or
when seeking technical assistance. Refer to Figure 1.
Figure 1
Replacement Parts
If literature or replacement parts are required, contact
the source from which the machine was purchased or
contact Alliance Laundry Systems LLC at
[phone] for the name of the nearest
authorized parts distributor.
Customer Service
For technical assistance, contact your local distributor
or contact:
Alliance Laundry Systems
Shepard Street
P. O. Bo x 9 90
Ripon, WI 54971-0990
U.S.A.
www.alliancelaundry.com
Phone: [phone] Ripon, Wisconsin
[phone] Wevelgem, Belgium
PHM1397N
1 Inside the Door
2 On Upper Rear Panel
PHM1397C
1
2