Specifications

C003292ENR1

First Start-Up

IMPORTANT: The following safety checks are to

be performed BEFORE initial start-up.

1. Make sure all electrical and plumbing

connections have been made in accordance with

applicable codes and regulations.

2. Make sure machine is electrically grounded. This

is a high leakage current device! Improper

grounding can cause electrical shock hazards and

EMI problems.

3. Make sure all service connections (water, drain,

electrical, steam, etc.) to equipment are flexible

and are of correct size, length and type. Make

sure there are no kinks and that all clamps and

attachment points are secure.

4. Make sure all transport brackets have been

removed (where applicable).

5. Make sure machine is properly grouted to floor

and leveled. Always allow plenty of time for

grout to cure before tightening anchor bolts and

running machine.

6. Make sure anchor bolts have been tightened

properly.

IMPORTANT: The following safety checks are to

be performed DURING the initial start-up.

Contact a qualified technician if necessary.

1. Verify door lock system works properly. Do this

by checking if machine starts a cycle with

loading door open or loading door can be opened

while machine is in operation.

2. Verify machine does not move or vibrate

excessively. Do this by loading machine with a

small load of laundry (about half capacity) and

running a program with a high-speed extract. The

machine should be reasonably quiet and still

during the extract.