Instruction manual

ManualsBrandsAlliance Laundry Systems ManualsHousehold AppliancesBT3LLFSP401UW01

Programming Control

802953

How to Program Cycle #2 Time “PCt2”

This option allows the owner to set the Cycle #2 Time

display.

1. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable Cycle Time Display options until

“PCt2” appears in the display.

2. When “PCt2” appears in the display, press the

START (enter) keypad. The current Cycle #2

Time is displayed.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to increase or decrease the

current number of minutes to the desired number

of minutes.

NOTE: The Cycle #2 Time can be set from 0 to 255.

The factory default setting is 34.

4. Press the START (enter) keypad when the

desired number of minutes appears in the display.

5. The next Cycle Time Display option, “PCt3”,

will appear in the display.

NOTE: To program “PCt3” (Cycle #3 Time),

continue to next Cycle Time Display option. To

program other options, press the DELICATES

30 (<) keypad and refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

How to Program Cycle #3 Time “PCt3”

This option allows the owner to set the Cycle #3 Time