Instruction manual

ManualsBrandsAlliance Laundry Systems ManualsHousehold AppliancesBT3LLFSP401UW01

Programming Control

802953

20. Special Vend B Days Enable

“SPb-”

This option allows the owner to enable or disable a

second special vend.

Special Vend B can be programmed using an external

device or network.

How to Program Special Vend B Days

Enable

1. Control must be in Manual Mode. Refer to

Entering the Manual Mode.

2. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad until “Prog” appears in the

display. Press the START (enter) keypad and

“AtS1” will appear in the display.

3. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to scroll through the

programmable options until “SPb-” appears in

the display.

4. When “SPb-” appears in the display, press the

START (enter) keypad. The current Special Vend

B Days Enable status will appear in the display.

“on” = Option Enabled

“oFF” = Option Disabled (factory default

setting)

5. Press the NORMAL 40 ( ) or the DELICATES

COLD ( ) keypad to change the current status.

6. Press the START (enter) keypad when the correct

status appears in the display. The next option,

“SPC-”, will appear in the display.

NOTE: To program “SPC-” (Special Vend C Days

Enable), refer to option 21. To program other

options, refer to the appropriate section.

How to Exit Programming Feature

Press the DELICATES 30 (<) keypad until the control

returns to Ready Mode.

21. Special Vend C Days Enable

“SPC-”