Instruction manual

Programming Control
802953
54
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
How to Program Special Vend A Start
Hour “SA02”
This option allows the owner to set the hour that
Special Vend A will begin.
1. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable Special Vend A options until
“SA02” appears in the display.
2. When “SA02” appears in the display, press the
START (enter) keypad. The current start time (in
military time) will appear in the display.
NOTE: The hours will be displayed in military
time.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
start hour to the desired hour.
4. Press the START (enter) keypad when the correct
hour appears in the display. The next Special Vend
A option, “SA03”, will appear in the display.
NOTE: To program “SA03” (Special Vend A Start
Minute), continue to next Special Vend A option. To
program other options, press the DELICATES 30
(<) keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
How to Program Special Vend A Start
Minute “SA03”
This option allows the owner to set the minute that
Special Vend A will begin.
1. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable Special Vend A options until
“SA03” appears in the display.
2. When “SA03” appears in the display, press the
START (enter) keypad. The current start minute
will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to increase or decrease the
start minute to the desired minute.
4. Press the START (enter) keypad when the correct
minute appears in the display. The next Special
Vend A option, “SA04”, will appear in the
display.
NOTE: To program “SA04” (Special Vend A
Length in Hours), continue to next Special Vend A
option. To program other options, press the
DELICATES 30 (<) keypad and refer to the
appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
>
<
>
<
>
<
>
<