Instruction manual

Programming Control
802953
42
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
How to Program Breakaway Step Speed
“brAy”
This option allows the owner to set the breakaway
speed.
1. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable Cycle Programming options until
“brAy” appears in the display.
2. When “brAy” appears in the display, press the
START (enter) keypad. The current Breakaway
Step Speed will appear in the display.
“rEg” = Regular agitate speed (factory default
setting for NORMAL 90, NORMAL
60, NORMAL 40, PERM PRESS 60)
“Lo” = Low agitate speed (factory default
setting for DELICATES 30,
DELICATES COLD)
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to change the current status.
4. Press the START (enter) keypad when the
desired status appears in the display. The next
Cycle Programming option, “StA1”, will appear
in the display.
NOTE: To program another cycle, repeat Cycle
Programming steps. To program other options,
press the DELICATES 30 (<) keypad and refer to
the appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
>
<
>
<