Instruction manual

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming Control
41
802953
How to Program Final Spin Step “FSPI”
This option allows the owner to set the amount of time
and speed for a final spin.
1. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable Cycle Programming options until
“FSPI” appears in the display.
2. When “FSPI” appears in the display, press the
START (enter) keypad. The first Final Spin Step
option will appear in the display.
3. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to scroll through the
programmable options. Refer to Table 8.
4. Press the START (enter) keypad when the
desired programmable option appears in the
display. The current status/value will appear in
the display. Refer to Tabl e 8.
5. Press the NORMAL 40 ( ) or the DELICATES
COLD ( ) keypad to change the current status/
value.
6. Press the START (enter) keypad when the
desired status/value appears in the display. The
next Final Spin Step option will appear in the
display.
NOTE: To program “brAy” (Breakaway Step
Speed), press the DELICATES 30 (<) keypad and
continue to next Cycle Programming option. To
program other options, press the DELICATES
30 (<) keypad and refer to the appropriate section.
How to Exit Programming Feature
Press the DELICATES 30 (<) keypad until the control
returns to Ready Mode.
Final
Spin
Step
Description
Status/
Value
Factory Default
Setting
“
FSEn”Final Spin
Step Enable
“on”/“oFF”“on”
“
SnIn”Final Spin
Minutes
1-6 NORMAL 90,
NORMAL 60,
NORMAL 40,
PERM PRESS 60 =
6
DELICATES 30,
DELICATES COLD
= 4
“
SSPd”Final Spin
Speed
“Lo” = Low
Speed
“nEd” =
Medium
Speed
“HI” = High
Speed
NORMAL 90,
NORMAL 60
NORMAL 40 =
“HI”
PERM PRESS 60 =
“nEd”
DELICATES 30,
DELICATES COLD
= “Lo”
Table 8
>
<
>
<
>
<