Instruction manual

© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Programming Control
37
802953
12. Cycle Programming “CyC-”
This option allows the owner to program different
aspects for various steps in each type of cycle. There
are six cycles available for programming.
For an overview of the cycle programming options,
refer to Table 6.
“CyCX” Cycle Number 1-6
Cycle Stage Step Time Speed Dispensers Temperature
1
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
2
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
3
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
4
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
5
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
6
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
7
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
8
Fill/Agitate 1-25 Regular or Low on or off 0-90°C
Cold Spray on or off
Final Spin Step
on or off 0-6 Low, Medium or High
Breakaway
Step Speed
Regular or Low
Table 6