Instruction manual

Programming Control
802953
18
© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
(continued)
Option
Number
Option
Display
Description Factory Default Value Range
a“CnP1” Cycle Modifier B Price 25 0 - 65,535
b“CnP2” Cycle Modifier C Price 50 0 - 65,535
c“CnP3” Cycle Modifier B Option 2 0 - 15
d“CnP4” Cycle Modifier C Option 3 0 - 15
e“CnP5” Cycle Modifier Added Wash Time 2 0 - 15
*f “CnP6” Default Cycle Modifier 0 0 - 2
*24 “PCt-” Cycle Time Display — —
*a “PCtE” Cycle Time Display Enable oFF on/oFF
*b “PCt1” Cycle #1 Time 34 0 - 255
*c “PCt2” Cycle #2 Time 34 0 - 255
*d “PCt3” Cycle #3 Time 32 0 - 255
*e “PCt4” Cycle #4 Time 31 0 - 255
*f “PCt5” Cycle #5 Time 28 0 - 255
*g “PCt6” Cycle #6 Time 28 0 - 255
25 “droP” Drop Off Mode (On/Off) oFF on/oFF
26 “LPSA” Low Power/Auto Shutdown A Days Enable
(On/Off)
oFF on/oFF
27 “LPSb” Low Power/Auto Shutdown B Days Enable
(On/Off)
oFF on/oFF
28 “LPSC” Low Power/Auto Shutdown C Days Enable
(On/Off)
oFF on/oFF
29 “LPSd” Low Power/Auto Shutdown D Days Enable
(On/Off)
oFF on/oFF
30 “PFr” Power Fail Reset oFF oFF/133 - 255
31 “IrA” IR Access (On/Off) on on/oFF
32 “rAEn” Manual Rapid Advance (On/Off) on on/oFF
33 “dAEn” Manual Diagnostics (On/Off) on on/oFF
34 “PtEn” Production Test Cycle (On/Off) on on/oFF
*This option available in software version “S 02” or higher only.