Operating instructions

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Operation
17
F232223
Display Indicators
Table 2 lists the various displays and what they
mean. The operator should become familiar with
these machine displays.
Display Meaning
tESt
Diagnostic test cycle selected or enabled
SPIn
Spin (extract) step
SUP1
Supply signal 1 (“S1” output), normally detergent
SUP2
Supply signal 2 (“S2” output), normally bleach
SUP3
Supply signal 3 (“S3” output), normally softener
SUP4
Supply signal 4
SUP5
Supply signal 5
SdLY
Spin coast (motor coasts after high speed extract)
CFIL
Cold Fill
HFIL
Hot Fill
bFIL
Warm Fill (cold + hot)
bLCH
Control will also light “add bleach” indicator
CY__
Cycle number (followed by a space and number 1 through highest cycle number)
nor
n
Normal agitation selected
gEnt
Gentle (reduced) agitation selected
For
Wash speed forward (during test cycle)
rEv
Wash speed reverse (during test cycle)
LO
Low water level
nEd
Medium water level
HI
High water level
CEL
Display all temperatures in degrees Celsius
FAr
Display all temperatures in degrees Fahrenheit
___C
The first 3 digits are reserved for temperature reading, C indicates “degrees Celsius”
Table 2