Operating instructions

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
11
F232223
Introduction
Model Identification
Information in this manual is applicable to these
models:
Nameplate Location
The nameplate is located on the cage wrap (below
plumbing bracket) and on top rear of the control
module. Always provide the machine’s serial number
and model number when ordering parts or when
seeking technical assistance. Refer to Figure 2.
Figure 2
Replacement Parts
If literature or replacement parts are required, contact
the source from which the washer-extractor was
purchased or contact Alliance Laundry Systems LLC
at [phone] for the name of the nearest
authorized parts distributor. A parts manual may be
ordered by returning the reply card provided with each
washer-extractor.
Customer Service
For technical assistance, contact your local distributor
or call:
[phone]
Ripon, Wisconsin
A record of each washer-extractor is on file with the
manufacturer. Always provide the machine’s serial
number and model number when ordering parts or
when seeking technical assistance. Refer to Figure 2.
UW35B2 UW60B2
PHM598N
1 Top Rear of Control Module
2 Cage Wrap (Below Plumbing Bracket)
P
U
S
H
2
1