User guide

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT9-05-72R8
21
Upgrading the Washer Extractor’s Firmware (cont.)
3. From the Communication via front connector window, click Write Software. Refer to Figure 2.
The Open window appears.
Figure 2
4. Navigate to the firmware file. Refer to Figure 3.
IMPORTANT: Do not open the firmware file yet.
5. Disconnect power from the washer-extractor.
6. Turn the washer-extractor’s Run/Program switch to the Program position.
Figure 3
CFD1005R
Write
Software
CFD1004R