Service manual

60 9001900
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
19. Excessive Vibration and/or Noise During Spin
The machine shows
excessive vibration
and/or noise during
spin.
Is the
machine
loaded
properly?
Has the
machine been
installed
properly?
Do the
bearings
require
replacement?
Yes
Yes
CFD2008S
Make sure that a full load is being
washed. Never wash partial loads.
Do not mix various laundry items
together in the same load (e.g., do not
wash towels and sheets together).
Avoid using laundry bags.
No
Make sure that the machine is
anchored to a flat, level surface. Bolt-
down installation on soft mount
machines is optional.
Refer to the installation manual
supplied with your machine for exact
installation specifications.
No
Check the trunnion bearings' noise
factor.
Lift up on the basket at the front of the
tub. Check for any up and down play
that would indicate bearing wear.
Replace the bearings as needed.
Yes