Service manual

4 9001900
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Safety Information
Important Safety Instructions
1. Read all instructions before using the washer-
extractor.
2. Refer to the GROUNDING INSTRUCTIONS in
the INSTALLATION manual (supplied with your
washer-extractor) for the proper grounding of the
washer-extractor.
3. Do not wash textiles that have been previously
cleaned in, washed in, soaked in or spotted with
gasoline, dry-cleaning solvents or other
flammable or explosive substances. They give off
vapors that could ignite or explode.
4. Do not add gasoline, dry-cleaning solvents or
other flammable or explosive substances to the
wash water. These substances give off vapors that
could ignite or explode.
5. Under certain conditions, hydrogen gas may be
produced in a hot water system that has not been
used for two weeks or more. HYDROGEN GAS
IS EXPLOSIVE. If the hot water system has not
been used for such a period, before using a
washer-extractor, turn on all hot water faucets and
let the water flow from each for several minutes.
This will release any accumulated hydrogen gas.
The gas is flammable. Do not smoke or use an
open flame during this time.
6. Do not allow children to play on or in a washer-
extractor. Close supervision of children is
necessary when the washer-extractor is used near
children.
7. Before the washer-extractor is removed from
service or discarded, remove the door to the
washing compartment.
8. Do not reach into the washer-extractor if the wash
basket is moving.
9. Do not install or store the washer-extractor where
it will be exposed to water and/or weather.
10. Do not tamper with the washer-extractor’s
controls.
11. Do not repair or replace any part of the washer-
extractor or attempt any servicing unless
specifically recommended in the user-
maintenance instructions or in published user-
repair instructions that the user understands and
has the skills to carry out.
12. To reduce the risk of an electrical shock or fire,
DO NOT use an extension cord or an adapter to
connect the washer-extractor to an electrical
power source.
13. Use the washer-extractor only for its intended
purpose, washing clothes.
14. ALWAYS disconnect the washer-extractor from
its electrical supply before attempting any
service.
15. Install the washer-extractor according to the
INSTALLATION INSTRUCTIONS. All
connections for water, drain, electrical power and
grounding must comply with local codes and,
when required, be made by licensed personnel.
16. To reduce the risk of fire, textiles which have
traces of any flammable substances such as
vegetable oil, cooking oil, machine oil,
flammable chemicals, thinner, etc. or anything
containing wax or chemicals such as in mops or
cleaning cloths, must not be put into the washer-
extractor. These flammable substances may cause
the fabric to ignite.
17. Do not use fabric softeners or products to
eliminate static unless recommended by the
manufacturer of the fabric softener or product.
18. Keep the washer-extractor in good condition.
Bumping or dropping the washer-extractor can
damage its safety features. If this occurs, have the
washer-extractor checked by a qualified service
person.
19. Replace worn power cords and/or loose plugs.
20. Be sure that water connections have a shut-off
valve and that fill hose connections are tight.
CLOSE the shut-off valves at the end of each
wash day.
To reduce the risk of fire, electric shock, serious injury or death to persons when using your
washer, follow these basic precautions:
W023
WARNING