Service manual

26 9001900
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Troubleshooting
6. Door Lock Switch Analysis: Display Shows “Door Error”
CFD2012S
1
The display reads “door error”.
Check
the wiring from the
door terminal on the main
board to the molex plug
(75-165 models only)
and from the molex plug to
the door lock switches and
solenoid. Is the wiring intact
and properly
connected?
YES
2
3
Repair/replace the wiring as
needed.
NO
With the
door closed,
is there voltage
the white/brown and
white/orange wires
on the top
switch?
Replace the top switch.
YES
Is
there voltage
(5 Volts DC) between
the black and red
wires wires on the
solenoid?
NO
Replace the solenoid.
YES
Is
there voltage (70
Volts AC) between the
black and red
terminals on the main
board's door
terminal?
NO
Replace the main board.
NO
YES
(5 Volts DC) between