Service manual

9001900

Section 4

Troubleshooting

1. Display Error: Display reads “Memory Error”

To reduce the risk of electrical shock, fire, explosion, serious injury or death:

• Disconnect electrical power to the washer-extractor before servicing it.

• Close the gas shut-off valve to the washer-extractor (when applicable) before servicing it.

• Never start the washer-extractor with any guards/panels removed.

• Whenever ground wires are removed during servicing, these ground wires must be

reconnected to ensure that the washer-extractor is properly grounded.

W461R1

WARNING

Display reads Memory Error

Rewrite the cycles

using the Alliance Planner

software and cable.

YES

Note: - An unknown component

has been found in the wash cycle(s).

The cycle memory is corrupt

and contains unknown information.

CFD2009S