Specifications

Installation

801455

Sink Installation

For this type of installation, use the beaded tie-down

strap (supplied in accessories bag) or use a large wire

tie (available from your local hardware store), and

secure the drain hose to the cabinet top hinge (refer to

Figure 7). This will prevent the drain hose from

dislodging during use.

Figure 7

In-the-Wall Installation

For installations of this type, the drain hose MUST be

secured to one of the fill hoses using the beaded tie-

down strap from accessories bag.

NOTE: End of drain hose must not be below 24 in.

(61 cm).

Figure 8

FLW1959N

1 24 in. to 36 in. (91.44 cm recommended

height)

2 Standpipe 2 in. (5.08 cm) or 1-1/2 in. (4 cm)

3 Beaded Tie-Down Strap

Figure 6

FLW1960N

1 Drain Hose

2 Tie-Down Strap (Wire tie or tape if

necessary)

FLW1959N

FLW1960N

H023I

1 Drain Hose

2 Tie-Down Strap (Tape if necessary)

3 Fill Hoses