Specifications

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
67
F8429301ENR9
Start Up
Pallet Jack cover Plate Installation
(80 and 100 Pound Models Only)
After machine is fully installed, the optional pallet
jack cover plate can be installed.
1. Locate the two holes on the front of the machine
base frame. Refer to Figure 55.
2. Using the hardware from removing plate from
back panel, install the cover plate to the machine
base frame. The square on stud goes into square
hole in machine frame. Refer to Figure 55.
Basket Rotation
Check that basket rotation is counterclockwise in the
extract step.
1. If rotation is not counterclockwise, disconnect
power to machine.
2. Have a qualified electrician reverse any two
motor leads at the AC terminal block.
CHM2392N
1 Nut
2 Cover Plate
3 Stud
4 Machine Base Frame
Figure 55
4
3
1
2
1