Specifications

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
F8429301ENR9
46
Drain Connection
IMPORTANT: Machine must be installed in
accordance with all local codes and ordinances.
All drain systems must be vented to prevent an air lock
or siphoning.
Use the supplied black rubber adapter and clamps to
transition from the machine drain outlet to the 2 inches
(51 mm) schedule 40 PVC plumbing (20 and 30
models) and the 3 inches (76 mm) schedule 40 PVC
plumbing (40, 60, 80, 100 and 125 models).
If proper drain size is not available or practical, a surge
tank is required. A surge tank along with a sump pump
should be used when gravity drainage is not possible.
Figure 40
Figure 41
CHM2379N
1 Rear of Machine 4 Drain Trough
2 Drain Pipe 5 Strainer
3 Steel Grate 6 Waste Line
CHM2379N
4
1
2
3
DRAIN TROUGH SYSTEM
6
1 in. (25 mm)
minimum gap
5
CHM2386N
1 Drain Hose 4 Overflow Hose
2 Drain Valve 5 Vent Pipe*
3 Drain Tee 6 Trap (as required by local codes)
* Drain line must be vented to meet local plumbing codes.
CHM2386N
1
2
3
4
5*
DIRECT DRAIN SYSTEM
6