Specifications

Installation

201932

3. Install extension lever with rounded corner

facing away from extension bracket using bolt,

washer and nut. Refer to Figure 18.

4. Install extension bracket and lever assembly onto

coin slide bracket using two screws and locknuts.

Refer to Figure 19.

IMPORTANT: Install coin slide bracket with side

marked "A" facing up and toward extension

bracket and lever assembly. Refer to Figure 19.

5. Install coin slide extension assembly onto top of

coin slide using two remaining screws and

lockwashers. Refer to Figure 20.

6. Before installing coin slide and extension, make

sure ground wire is tucked under control shield to

provide clearance for coin slide. Refer to

Figure 21.

Figure 18

Figure 19

TLW1580K

Extension

Bracket

Bolt

Washer

Extension

Lever

Nut

Rounded

Corner

TLW1580K

Coin Slide Bracket -

Letter "A"

Extension Bracket and

Lever Assembly

TLW2155N

Figure 20

TLW2157N

Figure 21

Coin Slide Extension

Assembly

TLW2156N

Ground Wire Placement