AF-4222LS 22 cu. ft.
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor attachment. Follow all safety rules and operating instructions provided by your tractor's manufacturer when using attachment. Never allow children or untrained persons to operate tractor or attachment.
Carton Contents (x1) 46 (x1) 45 (x1) 42 (x2) 40 (x2) 47 (x2) 39 (x1) 25 (x2) 26 (x2) 44 (x2) 55 (x2) 57 (x1) 5 (x2) 17 (x1) 6 (x2) 49 (x2) 31 (x2) 3 (x1) 4 (x1) 50 (x2) 53 (x2) 38 (x8) 27 (x4) 54 (x2) 30 (x2) 32 (x3) 60 (x4) TOOLS REQUIRED FOR ASSEMBLY: • 9/16" Wrench and Socket 2 28 (x10) 29 (x11)
1 Assembly Instructions Attach Short Hitch Tubes to Sweeper Assembly and tighten hardware. 29 60 26 28 27 DO NOT OVERTIGHTEN. 2 Attach Handle to Height Adjustment and tighten hardware. 3 29 3 31 Insert Long Hitch Tubes into Short Hitch Tubes and snap into position.
4 Assembly Instructions Install hardware through front two holes of Long Hitch Tubes as shown. Hold Adjustment Lever in position and install third bolt as shown. Pin Adjustment Lever to Handle. 4 38 DO NOT TIGHTEN AT THIS TIME. 5 29 28 28 32 Install Clevis Bars as shown; Clevis bolts pass between Hitch Tube bolts. Tighten Hitch Tube hardware first, then tighten Clevis hardware. 30 6 5 5 6 6 29 Insert Bottom Frame Tubes into Rear Frame Tube and snap into position.
7 Assembly Instructions Slide Hopper Bar into pocket of Hopper Bag as shown. 39 45 8 Place bottom frame assembly into Hopper Bag. Install Clevis Pins through Hopper Bag, Hopper Bar, and Bottom Frame Tubes and secure with Hairpins. 38 50 38 9 50 Insert Top Frame Tubes into Rear Frame Tube and snap into position.
10 Assembly Instructions Place top frame assembly into Hopper Bag. Install Clevis Pins through Top Frame Tubes and Bottom Frame Tubes and secure with Hairpins. 38 49 38 11 Slide Pivot Rod through Top Frame Tube and Connecting Tube, then through pocket of Hopper Bag, then through Connecting Tube and Top Frame Tube. Secure both ends with Washer and Hairpin. 55 38 46 38 53 53 55 12 49 Hold Hopper Bag open and carefully insert Tension Rods into holes in Rear Frame Tubes.
13 Assembly Instructions Insert Connecting Tubes into Short Hitch Tubes and secure with Quick-Release Pins. Install Hitch Pin and secure with Hairpin. 54 17 54 38 14 Tie Dump Rope securely around exposed section of Rear Frame Tube.
Operating Instructions Before Using Lawn Sweeper: 1. Read all Safety Rules found on page 1. How to Sweep Lawn: 1. Remove large debris from lawn. 2. Do not sweep if conditions are too wet or muddy. 3. Attach Lawn Sweeper to tractor using supplied hitch pin. The multi-pronged hitch allows the Lawn Sweeper to accomodate varying tractor hitch heights; choose the appropriate setting so that Lawn Sweeper hitch tubes are roughly level with the ground. 4.
Operating Instructions Storing Lawn Sweeper: 1. Empty hopper bag and thoroughly clean Lawn Sweeper before storing. 2. Store Lawn Sweeper away from excessive heat to prevent damage. 3. Brushes must not contact ground during storage to prevent damage. 4. Remove quick-release pins to separate hopper bag from Lawn Sweeper. 5. Carefully remove tension rods and collapse hopper bag for compact storage. 6.
Limited Warranty If this product fails due to a defect in material or workmanship within THREE YEARS from the date of purchase, we will at our option repair or replace it free of charge. This warranty excludes tires, wheels, brushes and bag, which are expendable and become worn during normal use. This warranty does not cover: • Repairs necessary because of operator abuse or negligence. • Equipment used for commercial or rental purposes. • Paint that is worn or faded due to normal use or exposure.
Repair Parts 17 29 30 3 4 31 29 60 38 26 28 1 27 29 28 25 5 6 29 38 28 32 59 34 24 8 2 59 24 21 37 10 13 22 22 15 24 62 14 16 23 7 12 59 24 22 REPLACEMENT PARTS ORDERING 11 OHIO STEEL INDUSTRIES 1-800-652-2321
Repair Parts 57 39 63 67 46 47 67 61 55 64 38 53 54 38 67 49 50 45 REPLACEMENT PARTS ORDERING 67 12 61 65 OHIO STEEL INDUSTRIES 1-800-652-2321
(800) 652-2321
