Instructions / Assembly

ManualsBrandsAllFitHD ManualsKitchen1250 lb. Steel Arched Loading Ramps

Assembled in the U.S.A. of domestic and imported components

READ AND FOLLOW ALL SAFETY RULES AND OPERATING

INSTRUCTIONS BEFORE USING THIS EQUIPMENT

AF-1250SLR

1250 LB STEEL FOLDING LOADING RAMPS

U.S. PATENT No. 5,645,394

6000661 - REV A 10/10

Summary of content (10 pages)

PAGE 1
AF-1250SLR 1250 LB STEEL FOLDING LOADING RAMPS U.S. PATENT No. 5,645,394 READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT Assembled in the U.S.A.
PAGE 2
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using these loading ramps. Follow all safety rules and operating instructions provided by manufacturer of equipment to be loaded when using loading ramps. Never allow children or untrained persons to use loading ramps.
PAGE 3
Carton Contents 2 (2) 1 (2) 12 (x4) 4 (x4) 13 (x2) 3 (x4) 11 (x4) 5 (x8) 10 (x8) 9 (x4) 8 (x8) 6 (x8) 7 (x8) TOOLS REQUIRED FOR ASSEMBLY: • • 3/4" Wrench or Socket 9/16" Wrench or Socket • 2 Adjustable Wrench
PAGE 4
1 Assembly Instructions Attach support bars to ramp top. Tighten bolts at this time. Slide support bar pads onto bars as shown. 5 1 6 4 3 Note: Apply soapy water inside support bar pad, this will allow the pad to slide onto the bar easier. 7 8 2 Invert ramp bottom so that flanges face up. Place ramp top inside the ramp bottom so that the side holes of each are in line. Be sure to place a washer between the two ramp pieces to allow hinge to work properly.
PAGE 5
Operating Instructions USAGE: Look for a wall or depression to reduce the loading angle, the lower the ramp angle the easier the loading of the vehicle will be. Park the loading vehicle on flat, firm, or grassy terrain. Set the emergency brake and chock the tires of the loading vehicle to prevent any movement while loading and unloading the equipment. Center loading ramp on the loading surface with support bars on top.
PAGE 6
Warranty If this product fails due to a defect in material or workmanship within TWO YEARS from the date of purchase, we will at our option repair or replace it free of charge. This warranty does not cover: • Repairs necessary because of operator abuse or negligence. • Equipment used for commercial or rental purposes. • Paint that is worn or faded due to normal use or exposure. To arrange for product repair call 1-800-652-2321, or return this product to place of purchase for replacement.
PAGE 7
Repair Parts 12 5 6 4 7 8 1 11 2 10 9 13 6 3
PAGE 8
Notes 7
PAGE 9
Notes 8
PAGE 10
(800) 652-2321