User's Manual

User Manual
Manual No. AMSL/DMR/UM/FD 009
Rev. 00 Effective Date 12.07.2022 Page | 82
Radiated RF
IEC 61000-4-3
MHz
6 Vrms:
in ISM bands
between
0,15 MHz and
80 MHz
80 % AM at 1
kHz
3 V/m
80 MHz – 2,7
GHz
80 % AM at 1
kHz
MHz
6 Vrms:
in ISM bands
between
0,15 MHz and
80 MHz
80 % AM at 1
kHz e)
3 V/m
80 MHz – 2,7
GHz
80 % AM at 1
kHz
be used no closer to any part of the
T4336RWC and T4336RWG including
cables, than the recommended
separation distance calculated from
the equation applicable to the
frequency of the transmitter.
Recommended separation distance:
d = 1,2 P
d = 1,2 P 80MHz to 800 MHz
d = 2,3 P 800MHz to 2,7 GHz
Where P is the maximum output
power rating of the transmitter in
watts (W) according to the
transmitter manufacturer and d is the
recommended separation distance in
metres (m).
Interference may occur in the vicinity
of equipment marked with the
following symbol:
NOTE1 At 80 MHz and 800 MHz, the higher frequency range applies.
NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
Recommended separation distance between
portable and mobile RF communications equipment and the T4336RWC, T4336RWG
The T4336RWC, T4336RWG is intended for use in an electromagnetic environment (for