User's Manual

User Manual
Manual No. AMSL/DMR/UM/FD 009
Rev. 00 Effective Date 12.07.2022 Page | 66
Caution
These actions are carried out by Authorized Personnel’s not End Users.
5.5.3. Standard Configuration
A. Other Essential System Components necessary to perform Digital Radiography
 Detector (Supporting SDK Interface) can be used in combination with the image
processing unit provided by System Integrator.
 The X-ray equipment is composed of X-ray high voltage generator and X-ray
console, etc. The hand switch is connected with the console for the exposure. At
first, when making an exposure, press the Prep switch only of the hand switch.
After confirming that the X-ray equipment is ready System Integrator of X-rays,
press the Exp. switch of the hand switch.
 The Access Point is required system, when detector is used in wireless
communication mode.
B. A standard configuration of this device is as below.